ETCD集群安装实验

目录

【1、下载二进制程序】
【2、安装etcd集群】
【3、查询集群状态】
【4、存入读取数据】
【5、注意事项】
【6、参考链接】

简介：
     Etcd的官网文档及其在GitHub上的文档，已经非常全了，而且简洁明了，无论是二进制安装、还是Docker下运行、命令操作，都有详细的说明。但直接复制安装还是会出错的，只有亲手做一遍，才能发现有哪些问题。

【1、下载二进制程序】

#分别在三台主机上下载并安装etcd和etcdctl程序
#设定ETCD的版本
ETCD_VER=v3.3.8

# 设置下载地址URL
GITHUB_URL=https://github.com/coreos/etcd/releases/download

DOWNLOAD_URL=${GITHUB_URL}

#清除之前的临时文件和目录，创建新的目录
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
rm -rf /tmp/etcd-download-test && mkdir -p /tmp/etcd-download-test

#使用curl下载etcd二进制文件
#地址为 https://github.com/coreos/etcd/releases/download/v3.3.8/etcd-v3.3.8-linux-amd64.tar.gz

#解包后删除压缩包
curl -L ${DOWNLOAD_URL}/${ETCD_VER}/etcd-${ETCD_VER}-linux-amd64.tar.gz -o /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz
tar xzvf /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz -C /tmp/etcd-download-test –strip-components=1
rm -f /tmp/etcd-${ETCD_VER}-linux-amd64.tar.gz

#将etcd 和 etcdctl可执行程序移动到系统路径中，方便直接运行程序
sudo mv /tmp/etcd-download-test/etcd* /usr/local/bin

#查询etcd和etcdctl版本，
#检查是否能正常运行程序。
etcd –version
ETCDCTL_API=3 etcdctl version

【2、安装etcd集群】

#在节点node1上执行

TOKEN=token-01
CLUSTER_STATE=new
NAME_1=node1
NAME_2=node2
NAME_3=node3
HOST_1=192.168.3.161
HOST_2=192.168.3.162
HOST_3=192.168.3.163
CLUSTER=${NAME_1}=http://${HOST_1}:2380,${NAME_2}=http://${HOST_2}:2380,${NAME_3}=http://${HOST_3}:2380

THIS_NAME=${NAME_1}
THIS_IP=${HOST_1}
etcd –data-dir=data.etcd –name ${THIS_NAME} \
–initial-advertise-peer-urls http://${THIS_IP}:2380 –listen-peer-urls http://${THIS_IP}:2380 \
–advertise-client-urls http://${THIS_IP}:2379 –listen-client-urls http://${THIS_IP}:2379 \
–initial-cluster ${CLUSTER} \
–initial-cluster-state ${CLUSTER_STATE} –initial-cluster-token ${TOKEN}

#此处注意，直接复制github网站上的代码，执行时会报错
#2018-06-29 16:57:54.048863 E | etcdmain: error verifying flags, ‘.–initial-advertise-peer-urls’ is not a valid flag. See ‘etcd –help’.
#https://github.com/coreos/etcd/blob/master/Documentation/demo.md

#需要清除掉–短横线之前的空格字符

#在节点node2上执行

TOKEN=token-01
CLUSTER_STATE=new
NAME_1=node1
NAME_2=node2
NAME_3=node3
HOST_1=192.168.3.161
HOST_2=192.168.3.162
HOST_3=192.168.3.163
CLUSTER=${NAME_1}=http://${HOST_1}:2380,${NAME_2}=http://${HOST_2}:2380,${NAME_3}=http://${HOST_3}:2380

THIS_NAME=${NAME_2}
THIS_IP=${HOST_2}
etcd –data-dir=data.etcd –name ${THIS_NAME} \
–initial-advertise-peer-urls http://${THIS_IP}:2380 –listen-peer-urls http://${THIS_IP}:2380 \
–advertise-client-urls http://${THIS_IP}:2379 –listen-client-urls http://${THIS_IP}:2379 \
–initial-cluster ${CLUSTER} \
–initial-cluster-state ${CLUSTER_STATE} –initial-cluster-token ${TOKEN}

#在节点node3上执行

TOKEN=token-01
CLUSTER_STATE=new
NAME_1=node1
NAME_2=node2
NAME_3=node3
HOST_1=192.168.3.161
HOST_2=192.168.3.162
HOST_3=192.168.3.163
CLUSTER=${NAME_1}=http://${HOST_1}:2380,${NAME_2}=http://${HOST_2}:2380,${NAME_3}=http://${HOST_3}:2380

THIS_NAME=${NAME_3}
THIS_IP=${HOST_3}
etcd –data-dir=data.etcd –name ${THIS_NAME} \
–initial-advertise-peer-urls http://${THIS_IP}:2380 –listen-peer-urls http://${THIS_IP}:2380 \
–advertise-client-urls http://${THIS_IP}:2379 –listen-client-urls http://${THIS_IP}:2379 \
–initial-cluster ${CLUSTER} \
–initial-cluster-state ${CLUSTER_STATE} –initial-cluster-token ${TOKEN}

【3、查询集群状态】
export ETCDCTL_API=3
HOST_1=192.168.3.161
HOST_2=192.168.3.162
HOST_3=192.168.3.163
ENDPOINTS=$HOST_1:2379,$HOST_2:2379,$HOST_3:2379

etcdctl –endpoints=$ENDPOINTS –write-out=table member list
etcdctl –endpoints=$ENDPOINTS –write-out=table endpoint status
etcdctl –endpoints=$ENDPOINTS –write-out=table endpoint health

图1查询集群的状态

【4、存入读取数据】

#在同一网段的其他机器上，下载并解包etcdctl,
#使用etcdctl命令访问etcd的集群
export ETCDCTL_API=3
HOST_1=192.168.3.161
HOST_2=192.168.3.162
HOST_3=192.168.3.163
ENDPOINTS=$HOST_1:2379,$HOST_2:2379,$HOST_3:2379

etcdctl –endpoints=$ENDPOINTS put myurl www.sina.com.cn
etcdctl –endpoints=$ENDPOINTS get myurl

图2使用etcdctl 存入和读取数据

#或者使用curl 访问etcd集群，
#通过集群中的任何一个节点，都可以访问到数据
HOST_1=192.168.3.161
HOST_2=192.168.3.162
HOST_3=192.168.3.163
curl -X PUT http://${HOST_1}:2379/v2/keys/myurl -d value=www.china.com
curl -X GET http://${HOST_1}:2379/v2/keys/myurl

curl -X GET http://${HOST_2}:2379/v2/keys/myurl

curl -X GET http://${HOST_3}:2379/v2/keys/myurl

curl http://192.168.3.161:2379/v2/keys

图3使用curl 存入和读取数据

【5、注意事项】

1、直接复制粘贴github上的代码会出错，需要清除etcd命令中–短横线之前的空格
2018-06-29 16:57:54.048863 E | etcdmain: error verifying flags, ‘.–initial-advertise-peer-urls’ is not a valid flag. See ‘etcd –help’.

2、主机的时间应该同步，可以安装NTP服务，否则会告警：
2018-06-29 18:04:29.328082 W | rafthttp: the clock difference against peer 5d5a6e579c03726b is too high [3.777632896s > 1s]

【6、参考链接】
etcd官方网址
https://coreos.com/etcd/docs/latest/demo.html

https://github.com/coreos/etcd/releases/

https://github.com/coreos/etcd/blob/master/Documentation/demo.md

etcd rest API基本操作
https://segmentfault.com/a/1190000005649865